Boston Audio Rentals - Digital Projection E-Vision Laser 10k

$1050 - +    Add to cart

Digital Projection E-Vision Laser 10k

Incredibly bright 1-Chip Laser-Phosphor projector for medium to large screens

The exceptionally bright single chip DLP E-Vision Laser 10K delivers an amazing 10,500 lumens from a stable solid-state light source, capable of producing over 20,000 hours of illumination. In professional venues such as auditoriums and visitor Attractions that regularly contend with high levels of ambient light, the E-Vision Laser 10K brightness ensures the audience will experience the message with the saturated colors, bright imagery, and dark area detail that you or your client intended.

Equally compelling is the lack of lamp replacements due to the solid state illumination system. By bypassing regular lamp replacement cycles, almost all costs related to the E-Vision Laser are incurred at the time of purchase. This key characteristic allows the E-Vision Laser 10K to have a much lower cost of ownership over the lifespan of the display.

Combine the exceptionally bright, long-life illumination source with a host of other precision features, and you have a projector solution that’s perfectly suited to a diverse range of professional venues.

 

E-Vision Laser 10K

9,500 ANSI / 10,500 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) 1,000:1 native | Part Number: 118-060

9,500 ANSI / 10,500 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) 1,000:1 native | Part Number: 118-060

Colour System: DMD Specification:
Laser Phosphor + 4-segment (RGBW) colour wheel for high brightness
 
Display Type:
1 x 0.67" DarkChip™ DMD™
1920 x 1200 pixels native.
Fast transit pixels for smooth greyscale and improved contrast. 
Aspect Ratio:
16x10 
Fill Factor
87%

Key Features

Video & Graphics Processing

  • HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.

  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources

  • Dual Pipe Processing: Two sources in parallel for Left and Right eyes.

  • Synchronisation of active glasses.

  • 3GSDI with loop-through.

  • 24p and 1080p native display.

  • DICOM simulation mode.

  •  
Geometry Correction

  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.

  • Blanking control for custom input window sizing.

  • Scaling for fixed aspect ratio screens.

  •  
Edge Blending 

  • For independent edge and blend width adjustment.


  •  

Picture in Picture

  • Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.

  •  
HDBaseT® Interface

  • Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.

  • Allows the projector to be placed up to 100m from the source with low cost cabling.

  •  
Colour Processing

  • Powerful seven point colour correction for accurate colour matching

  •  
Projector Controller Software

  • Intuitive user interface for network control

  • Simultaneous control of user-defined groups of projectors

  • At-a-glance monitoring of projector status

  •  
Projector Automation

  • Real-time clock provides daily on/off automation.

  •  
Projector Maintenance Features

  • Sealed optics.

  • Long life 20,000 hour illumination.


  •  
Source Compatibility:
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DisplayPort or VGA.
Component Video (SD and HD) via RGBHV.

Inputs/Outputs

 Video & Computer

Type

Connector

Qty

DVI-D 1.0
DisplayPort 1.1a
HDMI 1.4b
3G-SDI in
3G-SDI out
VGA / Analog RGB
VGA Monitor out
Component Video
HDBaseT (see LAN)
DVI
DisplayPort
HDMI
BNC
BNC
15-pin D-Sub
15-pin D-Sub
5 x BNC
LAN RJ45
1
1
2
1
1
1
1
1
1
 Communication & Control

Type

Connector

Qty

3D Sync Out
3D Sync In
LAN
RS232
Wired Remote
12V Trigger

NOTE: The LAN port is shared with HDBase-T.
BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
1
1
1
1
1
2

 

3D Formats Supported HDTV Formats Supported
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half) 
Top and Bottom
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz)
Computer Compatibility Bandwidth
Up to 1920 x 1200 165 MHz on analog RGB
165 Megapixels per second on HDMI
Remote Control Automation Control
Addressable IR remote control, wireless and wired.
On-Board keypad.
Crestron RoomView® Connected
PJLink Class 1
LAN
RS-232
AMX (Device Discovery)
Served web page
Colour Temperature Operation
3200 to 9300K
illumination Type Typical illumination Life
Laser Light Source 20,000 hours
Lenses

Lens

Part No.

Focus Range

Lens Shift

0.38 :1 fixed 117-341 0.68m - 2.44m Depends on image size, see Installation Guide.
0.75 - 0.93 :1 zoom 115-339 1.02m - 12.7m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
0.76 :1 fixed 112-499 0.81m - 5.08m none
1.25 - 1.79 :1 zoom 112-500 1.33m - 11.73m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
1.73 - 2.27 :1 zoom 112-501 1.83m - 14.9m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
2.22 - 3.67 :1 zoom 112-502 2.36m - 24.2m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
3.58 - 5.38 :1 zoom 112-503 3.8m - 35.35m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
5.31 - 8.26 :1 zoom 112-504 5.59m - 54.8m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
Lens Mount

Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).

Mechanical Mounting  
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
 
Power Requirements Power Consumption
100-240VAC 50/60Hz single phase Typical 1215W @ 240VAC in Normal mode
Typical 960W @ 240VAC in ECO mode
Typical 1270W @ 110VAC in Normal mode
Typical 1000W @ 110VAC in ECO modeW
Thermal Dissipation Fan Noise
Typical 4146 BTU/Hour @ 240VAC in Normal mode
Typical 3276 BTU/Hour @ 240VAC in ECO mode
Typical 4334 BTU/Hour @ 110VAC in Normal mode
Typical 3412 BTU/Hour @ 110VAC in ECO mode BTU/Hour
Normal mode: 42 dBA Typical
Eco mode: 39 dBA Typical
Operating/Storage Temperature Operating Humidity 
Operating: 0 to 40C (32 to 104F)
Operating: 40 to 45C (104 to 113F) w/ reduced light output
Storage: -20 to 60C (-4 to 140F)
10 to 90% relative, non-condensing
Weight (Chassis Only) Dimensions
28 kg 
62 lb 
L: 58.0 cm W: 50.0 cm H: 21.6 cm 
L: 22.8 in W: 19.7 in H: 8.5 in
Safety & EMC Regulations  
CB, CE, FCC Class 1, UL/cUL, CCC, RoHS 2
IEC EN 60825-1 Class 3R Laser Product,
IEC EN 62471-5 Risk Group 2 
 
Accessories
Accessory Part No.
Infrared Remote (replacement) 117-780

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

RELATED PRODUCTS